| ID |
Category |
Simple Name |
Detailed Description |
Thumbnail |
Location |
| A150 |
CARPENTRY |
auger, taper |
For enlarging an already bored hole. |
 |
H Drawer 1 Wheelwrights |
| A168 |
WHEELWRIGHTS |
bruzz |
bruzz |
 |
H South Wall Wheelwrights |
| A782 |
CARPENTRY |
plane, jack |
carpenters plane. used for rough planeing inscribed R Bates |
 |
H South Wheelwrights |
| A783 |
CARPENTRY |
plane, jack |
carpenters plane. used for rough planeing inscribed R Bates |
 |
H South Wheelwrights |
| A785 |
CARPENTRY |
plane, jack |
carpenters plane. used for rough planing lacks iron |
 |
H South Wheelwrights |
| A832 |
CARPENTRY |
draw bore pin |
A tapering steel pin used for drawing together mortice and tenon joints. tapering steel shaft fitted with handle. |
 |
H Wheelwrights |
| A835 |
CARPENTRY |
tool box |
box containing previous entries wooden box mad from 3/4"timber, fitted with two lifting handles and hasp and staple. contains lift out tray . |
 |
H South Wheelwrights |
| A837 |
WHEELWRIGHTS |
knee pads |
leather pads with metal buckles |
 |
H Wheelwrights |
| A840 |
CARPENTRY |
square |
two engineer squares - all in steel. Probably used for checking squareness of plane irons. |
 |
H Wheelwrights |
| A842 |
WOODWORKING |
saw,cross cut felling |
both handles set close to blade which tapers from one end to the other. |
 |
H North Wall Wheelwrights |
| A843 |
WOODWORKING |
saw, pit |
with tiller and box handles |
 |
H North Wall Wheelwrights |
| A844 |
WHEELWRIGHTS |
plumb rule |
missing line and bob |
 |
H North Wall Wheelwrights |
| A845 |
WHEELWRIGHTS |
plumb rule |
missing line and bob inscribed I. B. |
 |
H North Wall Wheelwrights |
| A846 |
CARPENTRY |
saw, tenon |
with brass back inscribed warranted superior |
 |
H Wheelwrights |
| A848 |
WHEELWRIGHTS |
drawing knife |
wheelwrights knife for use with wagons |
 |
H South Wall Wheelwrights |
| A849 |
WHEELWRIGHTS |
drawing knife |
wheelwrights knife for use with wagons |
 |
H South Wall Wheelwrights |
| A851 |
WHEELWRIGHTS |
drawing knife |
carpenters drawing knife fitted with odd handles |
 |
H South Wall Wheelwrights |
| A852 |
WHEELWRIGHTS |
rim gauge |
use on wagon wheels |
 |
H East Wall Wheelwrights |
| A853 |
WHEELWRIGHTS |
spoke fitter |
used for checking diameter of spokes where they were to fit into the rim or felloe of the wheel |
 |
H East Wall Wheelwrights |
| A854 |
WHEELWRIGHTS |
axle key drabble |
a large ring spanner used on axle nuts inscribed 2 |
 |
H East Wall Wheelwrights |
| A855 |
WHEELWRIGHTS |
traveller |
measures round a wagon wheel |
 |
H South Wall Wheelwrights |
| A856 |
LIGHTING |
lamp |
round oil lamp with broken glass chimney and perforated reservoir |
 |
H South Wall Wheelwrights |
| A857 |
LIGHTING |
lamp |
hurricane lamp wick missing |
 |
H South Wall Wheelwrights |
| A858 |
WHEELWRIGHTS |
auger, shell |
half cylinder blade with inbent horizontal cutter. |
 |
H Drawer 4 Wheelwrights |
| A859 |
WHEELWRIGHTS |
gimlet, shell |
half cylinder blade with inbent horizontal cutter. |
 |
H Drawer 4 Wheelwrights |
| A863 |
WHEELWRIGHTS |
gimlet |
for making holes. has an iron handle |
 |
H Wheelwrights |
| A865 |
WHEELWRIGHTS |
auger, shell |
half cylinder blade with inbent horizontal cutter. |
 |
H East Wall Wheelwrights |
| A866 |
WHEELWRIGHTS |
auger, shell |
half cylinder blade with inbent horizontal cutter. |
 |
H East Wall Wheelwrights |
| A867 |
WHEELWRIGHTS |
draw bore pin |
for drawing up mortice and tenon joints inscription R Bates. These differ from A832 as they are similar to a gimlet in appearance with handle at 90 degrees. |
 |
H Drawer 4 Wheelwrights |
| A868 |
WHEELWRIGHTS |
gimlet, bell hangers |
very long gimlet with egg shaped handle. used for the passage of the strings or wires connecting household bells. |
 |
H East Wall Wheelwrights |
| A869 |
WHEELWRIGHTS |
auger, taper |
until recent years the only tools available for boring large deep holes in wood. |
 |
H East Wall Wheelwrights |
| A871 |
WHEELWRIGHTS |
gimlet, shell |
half cylinder blade with inbent horizontal cutter. |
 |
H Drawer 4 Wheelwrights |
| A872 |
WHEELWRIGHTS |
gimlet, shell |
half cylinder blade with inbent horizontal cutter. square shaft extends to top of shell. |
 |
H Drawer 4 Wheelwrights |
| A873 |
WHEELWRIGHTS |
gouge, wagon builders |
a curved chisel |
 |
H Drawer 4 Wheelwrights |
| A874 |
WHEELWRIGHTS |
gouge |
solid steel gouge |
 |
H East Wall Wheelwrights |
| A875 |
WHEELWRIGHTS |
chisel, mortice socket |
has socket as a handle instead of a tang inscribed, Boddy,L |
 |
H East Wall Wheelwrights |
| A876 |
WHEELWRIGHTS |
chisel, mortice socket |
has socket as a handle instead of a tang inscribed, warranted cast steel |
 |
H Drawer 1 Wheelwrights |
| A877 |
WHEELWRIGHTS |
gouge,socket |
for gouging wood inscribed, Thos Ibbotson |
 |
H South Wall Wheelwrights |
| A878 |
WHEELWRIGHTS |
chisel, mortice |
strong chisel to take mallet blows |
 |
H East Wall Wheelwrights |
| A879 |
WHEELWRIGHTS |
chisel, mortice socket |
has socket as a handle instead of a tang inscribed, (AxB) Isorby cast steel |
 |
H Wheelwrights |
| A885 |
WHEELWRIGHTS |
chisel, lock mortice socket |
has socket as a handle instead of a tang inscribed J Way |
 |
H East Wall Wheelwrights |
| A888 |
WHEELWRIGHTS |
gouge, wheelwrights |
used for excavating wheel hubs inscribed I Sorby. Replacement handle made from a length of trap shaft. |
 |
H East Wall Wheelwrights |
| A895 |
WHEELWRIGHTS |
chisel, bruzz |
chisel |
 |
H East Wall Wheelwrights |
| A897 |
CARPENTRY |
saw set, gate type |
saw set End of handle turned through 90 degrees and pointed. 4 gates only all with holes at bottom used for pit or circular saws (salaman) |
 |
H South Wheelwrights |
| A898 |
CARPENTRY |
saw set, gate type |
saw set Turned wood handle and brass ferrule. Seven pairs of plain gates. Inscibed Bate. |
 |
H South Wheelwrights |
| A899 |
CARPENTRY |
saw set, gate type |
saw set Turned wood handle and iron ferrule. Four pairs of gates with holes at bottom. End of blade terminates in divided screw-driver possibly made by owner. |
 |
H South Wheelwrights |
| A900 |
CARPENTRY |
gauge, mortice |
for wheelwrights and coachbuilders Inscibed R.Bates |
 |
H South Wheelwrights |
| A902 |
CARPENTRY |
saw, back |
Has parallel blades for general bench work Inscribed I Sorby, warranted cast steel,open handle, eleven points per inch |
 |
H South Wall Wheelwrights |
| A904 |
CARPENTRY |
plane, jack |
plane for smoothing wood J P |
 |
H South Wheelwrights |
| A905 |
CARPENTRY |
plane, jack |
plane for smoothing wood Wakefield, R |
 |
H North Cupboard Wheelwrights |
| A907 |
WHEELWRIGHTS |
chisel, bruzz |
triangular chisel used to square out mortice holes. Socket type but with wood handle worn down almost to socket. Iron band around remaining wood and partially arround top of socket. |
 |
H South Wheelwrights |
| A909 |
WHEELWRIGHTS |
chisel, lock mortice |
Curved blade chisel Socket type. Replacement handle made from shaft of trap |
 |
H Drawer 1 Wheelwrights |
| A910 |
WHEELWRIGHTS |
gouge, wheelwright's |
socket type End of handle bound with iron ring. |
 |
H East Wall Wheelwrights |
| A911 |
CARPENTRY |
pattern |
pattern length of hardwood with cross section |
 |
H South Wheelwrights |
| A914 |
CARPENTRY |
spokeshave |
spokeshave spokeshave |
 |
H East Wall Wheelwrights |
| A915 |
CARPENTRY |
spokeshave |
spokeshave spokeshave |
 |
H East Wall Wheelwrights |
| A917 |
CARPENTRY |
spokeshave |
spokeshave spokeshave |
 |
H East Wall Wheelwrights |
| A918 |
FELLING |
felling axe |
kent felling axe Axe designed for felling trees |
 |
H Wheelwrights |
| A921 |
WHEELWRIGHTS |
block |
emery block Emery block. Made from 9mm. thick wood with shaped handle and hanging hole at one end. Length of fine emery cloth stuck on one face. |
 |
H South Wall Wheelwrights |
| A922 |
WHEELWRIGHTS |
gouge |
firmer gauge Firmer gauge. Has F. Staley, cast steel stamped on top of blade. |
 |
H Drawer 1 Wheelwrights |
| A923 |
CARPENTRY |
saw |
saw, double ended taper double ended taper saw. |
 |
H South Wall Wheelwrights |
| A924 |
CARPENTRY |
gauge |
marking gauge marking gauge. Has circular shaft and sliding block. Wooden locking screw. Broken flush with block. |
 |
H South Wall Wheelwrights |
| A925 |
WHEELWRIGHTS |
chisel |
firmer chisel Firmer chisel. Has tapered hexagonal handle stamped with "W" on three faces. I and H Sorby stamped on blade. |
 |
H Drawer 1 Wheelwrights |
| A926 |
WHEELWRIGHTS |
gauge |
firmer gauge Firmer gauge. I,Sorby Cast steel inscribed on blade. R.Bates stamped on handle |
 |
H Drawer 1 Wheelwrights |
| A927 |
WHEELWRIGHTS |
chisel |
firmer chisel Firmer chisel. Has I. Sorby inscribed on side of blade, and R.Bates on handle. |
 |
H Drawer 1 Wheelwrights |
| A932 |
WHEELWRIGHTS |
chisel |
chisel firmer Firmer chisel fitted with home made handle. |
 |
H Drawer 1 Wheelwrights |
| A933 |
WHEELWRIGHTS |
gouge |
firmer gouge Firmer gouge. |
 |
H Drawer 1 Wheelwrights |
| A935 |
WHEELWRIGHTS |
gauge |
mortice gauge Wheelwright and coachbuilders mortice gauge |
 |
H South Wheelwrights |
| A936 |
WHEELWRIGHTS |
square |
home made carpenters square Carpenters square. Homemade. |
 |
H South Wheelwrights |
| A938 |
CARPENTRY |
saw compass |
saw compass circular saw for use by wheelwright |
 |
H North Cupboard Wheelwrights |
| A941 |
WHEELWRIGHTS |
mallet |
carpenters mallet Head is made of wood, unlike a hammer where the head is made of metal. |
 |
H North cupboard Wheelwrights |
| A942 |
WHEELWRIGHTS |
mallet |
carvers mallet Carvers mallet. Has cylindrical head |
 |
H South Wheelwrights |
| A944 |
WHEELWRIGHTS |
mallet |
carpenters mallet Carpenters mallet with cylindrical head |
 |
H North cupboard Wheelwrights |
| A948 |
WHEELWRIGHTS |
rule |
boxwood rule 36 inch folding boxwood rule. Folds into 3 sections. |
 |
H South Wheelwrights |
| A950 |
WHEELWRIGHTS |
spirit level |
rectangular spirit level rectangular spirit level |
 |
H South Wheelwrights |
| A953 |
WHEELWRIGHTS |
bit |
Swiss gimlet bit |
 |
H Drawer 4 Wheelwrights |
| A954 |
WHEELWRIGHTS |
bit |
deck dowelling bit |
 |
H Drawer 4 Wheelwrights |
| A956 |
WHEELWRIGHTS |
bit |
bit rimer Bit rimer also known as bit reamer. Has "Sorby Cast Steel" engraved on shank. |
 |
H North Wheelwrights |
| A957 |
WHEELWRIGHTS |
gimlet |
gimlet shell Shell gimlet has side cutting body |
 |
H Drawer 4 Wheelwrights |
| A958 |
WHEELWRIGHTS |
gimlet |
gimlet twist Twist gimlet |
 |
H Drawer 4 Wheelwrights |
| A959 |
WHEELWRIGHTS |
gimlet |
gimlet shell Shell gimlet |
 |
H Drawer 4 Wheelwrights |
| A960 |
WHEELWRIGHTS |
bit |
reamer bit, TAPER D |
 |
H Drawer 4 Wheelwrights |
| A961 |
WHEELWRIGHTS |
bit |
shell bit Shell bit, 5/16 stamped on shank |
 |
H Drawer 4 Wheelwrights |
| A962 |
WHEELWRIGHTS |
bit |
auger bit Machine auger bit. Has "Snell FG CO 6" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A963 |
WHEELWRIGHTS |
bit |
auger bit Machine auger bit "ELL 11" stamped on shank" |
 |
H Drawer 4 Wheelwrights |
| A964 |
WHEELWRIGHTS |
bit |
auger bit Machine auger bit. Has "Snell FG CO 5" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A965 |
WHEELWRIGHTS |
bit |
auger bit Auger machine bit. "Ell" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A966 |
WHEELWRIGHTS |
bit |
auger bit Auger machine bit. "Snell manufacturing Co. 4" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A967 |
WHEELWRIGHTS |
bit |
auger bit Auger machine bit. "Snell manufacturing Co. 7" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A968 |
WHEELWRIGHTS |
bit |
auger bit Auger machine bit. "Snell manufacturing Co. 12" stamped on shank. |
 |
H Drawer 4 Wheelwrights |
| A969 |
WHEELWRIGHTS |
bit |
bit spoke trimmer Spoke trimmer bit |
 |
H South Wheelwrights |
| A970 |
WHEELWRIGHTS |
bits |
Auger Twist "A" Tanged Gedge pattern. "B" Scotch pattern Inscribed "W, Marples and sons Sheffield, England" on shaft. "C" Tanged Gedge pattern. "D" Scotch pattern "W.Marples and sons" inscribed on shaft. "E" Gedge pattern inscribed "W.Gilpin, Wedges Mill |
 |
H Drawer 4 Wheelwrights |
| A972 |
WHEELWRIGHTS |
bits |
Centre bits Centre bits. inscribed "A" I.Sorby,cast steel. "C" Inscribed Ryan, Euston Rd. To bore 7/8. |
 |
H Drawer 4 Wheelwrights |
| A973 |
WHEELWRIGHTS |
extension bit |
extension bit holder Brace, extension bit holder. |
 |
H Wheelwrights |
| A974 |
WHEELWRIGHTS |
bit |
bit countersink snailhorn Bit, countersink snailhorn. "1. Sorby cast steel" stamped on shaft. |
 |
H Drawer 4 Wheelwrights |
| A976 |
WHEELWRIGHTS |
bits |
shell bits Shell bits 4. "A" L 14.6cms Dia. 6mms, inscribed 1/4 on tang" "B" L. 17.8cms,Dia.9mms. "C" L.17.8cms Dia. 8mms "D" L. 16.8cms.Dia. 8mms, tang notched. |
 |
H Drawer 4 Wheelwrights |
| A977 |
WHEELWRIGHTS |
bit |
spoon bit A gouge shaped (shell) body with a spoon like nose with sharp edges. Authority Salaman |
 |
H Drawer 4Wheelwrights |
| A978 |
WHEELWRIGHTS |
spanner |
spanner wheelwrights other drawings Salaman fig 740(a)2, double ended with open ended square spanner one end and ring (eight sided) at other, ring offset 3.8cm |
 |
H Drawer 1 Wheelwrights |
| A979 |
WHEELWRIGHTS |
spanner |
spanner wheelwrights other drawings Salaman fig 740(a)2, double ended with open ended square spanner one end and ring (eight sided) at other, ring offset 3.2cm |
 |
H Drawer 1 Wheelwrights |
| A981 |
CARPENTRY |
bit |
Bit Auger Various types of twist bits of various sizes and condition. |
 |
H Drawer 4 Wheelwrights |
| A982 |
CRAFTS |
punch |
leather punch, screw type Inscription, King Dick, on handle (stamp) |
 |
H Wheelwrights |
| A983 |
CARPENTRY |
drill twist |
twist drill Salaman fig (285)b, a)inscribed on Tang. 1/8, b) inscribed on shaft 5/16 (method stamp) |
 |
H Drawer 4 Wheelwrights |
| A984 |
CARPENTRY |
gimlet |
gimlet Various conditions and sizes |
 |
H Drawer 4 Wheelwrights |
| A985 |
CARPENTRY |
punches |
6 punches. Only 5 shown in thumbnail |
 |
H Drawer 4 Wheelwrights |
| A986 |
CARPENTRY |
oilstone |
6 oilstones.One with lid |
 |
H South Wheelwrights |
| A987 |
CARPENTRY |
auger |
4 twist augers |
 |
H South Wheelwrights |
| A988 |
CARPENTRY |
drill |
drill |
 |
H Drawer 4 Wheelwrights |
| A992 |
CARPENTRY |
handle |
2 detatchable auger handles. One missing |
 |
H Drawer 1 Wheelwrights |
| A994 |
CARPENTRY |
brace |
wooden brace, top handle missing |
 |
H North Cupboard Wheelwrights |
| A998 |
CARPENTRY |
cramp |
G cramp |
 |
H South Wheelwrights |
| B5 |
CARPENTRY |
hacksaw blades |
two hacksaw blades |
 |
H Drawer 1 Wheelwrights |
| B6 |
CARPENTRY |
saw blade |
compass saw, or pad saw, blade |
 |
H Drawer 1 Wheelwrights |
| B7 |
CARPENTRY |
chisel |
cold chisel |
 |
H Drawer 1 Wheelwrights |
| B8 |
CARPENTRY |
scissors |
scissors |
 |
H South Wheelwrights |
| B9 |
CARPENTRY |
mineral polishing block |
mineral polishing block |
 |
H Drawer 1 Wheelwrights |
| B11 |
CARPENTRY |
rasp |
combination file-rasp |
 |
H South Wheelwrights |
| B12 |
WHEELWRIGHTS |
wrench |
clip wrench |
 |
H Wheelwrights |
| B14 |
WHEELWRIGHTS |
snips |
large pair of tin snips |
 |
H South Wall Wheelwrights |
| B16 |
WHEELWRIGHTS |
spanners |
19 assorted spanners |
 |
H Drawer 2 Wheelwrights |
| B21 |
WHEELWRIGHTS |
files |
124 assorted files |
|
H Drawer 3 Wheelwrights |
| B23 |
CARPENTRY |
plane |
adjustable rounder plane |
 |
H South Wheelwrights |
| B26 |
CARPENTRY |
plane |
rounder plane |
 |
H South Wheelwrights |
| B28 |
CARPENTRY |
plane |
rounder plane |
 |
H East Wall Wheelwrights |
| B30 |
CARPENTRY |
router |
moulding router |
 |
H North Cupboard Wheelwrights |
| B31 |
CARPENTRY |
compass |
beam compass |
 |
H South Wall Wheelwrights |
| B33 |
CARPENTRY |
hammer |
cross pein hammer |
 |
H North Cupboard Wheelwrights |
| B34 |
CARPENTRY |
router |
coachbuilders, or boxing, router |
 |
H East Wall Wheelwrights |
| B35 |
CARPENTRY |
router |
coachbuilders, or grooving, router |
 |
H South Wheelwrights |
| B37 |
CARPENTRY |
router |
coachbuilders, or moulding, router |
 |
H South Wheelwrights |
| B41 |
CARPENTRY |
brace |
three braces, two fitted with spoon bits |
 |
H South Wall Wheelwrights |
| B46 |
CARPENTRY |
router |
coachbuilders, or boxing, router |
 |
H East Wall Wheelwrights |
| B48 |
CARPENTRY |
router |
coachbuilders, or grooving, router. Marked R. BATES and G. MILLER |
 |
H East Wall Wheelwrights |
| B50 |
CARPENTRY |
spokeshave |
spokeshave |
 |
H East Wall Wheelwrights |
| B55 |
CARPENTRY |
router |
coachbuilders, or grooving, router |
 |
H South Wheelwrights |
| B56 |
CARPENTRY |
compass |
wheelwrights compass |
 |
H South Wall Wheelwrights |
| B57 |
CARPENTRY |
spokeshave |
Nelson shave blade missing |
 |
H East Wall Wheelwrights |
| B59 |
CARPENTRY |
plane |
jack plane |
 |
H North Cupboard Wheelwrights |
| B60 |
CARPENTRY |
bevel gauge |
bevel gauge, ends of each arm have been similarly shaped |
 |
H South Wall Wheelwrights |
| B61 |
CARPENTRY |
plane |
jack plane |
 |
H North Cupboard Wheelwrights |
| B62 |
CARPENTRY |
saw |
hand saw |
 |
H South Wall Wheelwrights |
| B63 |
CARPENTRY |
square |
tee square |
 |
H South Wall Wheelwrights |
| B65 |
CARPENTRY |
calipers |
wheelwrights calipers |
 |
H South Wall Wheelwrights |
| B66 |
CARPENTRY |
grindstone |
hand operated grindstone, wet or dry |
 |
H South Wheelwrights |
| B67 |
CARPENTRY |
adze |
wheelwrights adze |
 |
H East Wall Wheelwrights |
| B69 |
CARPENTRY |
plane |
jack plane, marked 2 on rear end |
 |
H South Wheelwrights |
| B73 |
CARPENTRY |
hacksaw |
hacksaw, old type with cast frame |
 |
H South Wall Wheelwrights |
| B75 |
CARPENTRY |
square |
steel square |
 |
H South Wall Wheelwrights |
| B78 |
CARPENTRY |
bevel |
bevel with stop |
 |
H South Wall Wheelwrights |
| B80 |
TRADE TOOLS |
bevel gauge |
bevel |
 |
H Wheelwrights |
| B81 |
CARPENTRY |
bevel |
bevel gauge, inscribed R. BATES |
 |
H South Wall Wheelwrights |
| B82 |
CARPENTRY |
hammer |
heavy duty solid one piece steel claw hammer |
 |
H North Cupboard Wheelwrights |
| B84 |
CARPENTRY |
saw |
compass saw, wormy handle |
 |
H North Cupboard Wheelwrights |
| B87 |
CARPENTRY |
saw |
panel saw |
 |
H South WallWheelwrights |
| B88 |
CARPENTRY |
saw |
hand saw |
 |
H South Wall Wheelwrights |
| B90 |
CARPENTRY |
saw |
compass saw |
 |
H North Cupboard Wheelwrights |
| B91 |
CARPENTRY |
mitre box |
mitre box |
 |
H South Wall Wheelwrights |
| B93 |
CARPENTRY |
chisel |
long firmer chisel |
 |
H South Wall Wheelwrights |
| B95 |
CARPENTRY |
gouge |
turning gouge |
 |
H South Wall Wheelwrights |
| B96 |
CARPENTRY |
chisel |
turning chisel |
 |
H South Wall Wheelwrights |
| B100 |
CARPENTRY |
chisel |
firmer chisel |
 |
H Drawer 1 Wheelwrights |
| B101 |
CARPENTRY |
drill |
two archmedian drills, double spiral pattern |
 |
H South Wall Wheelwrights |
| B103 |
CARPENTRY |
chisel |
mortice chisel |
 |
H South Wall Wheelwrights |
| B104 |
CARPENTRY |
hammer |
joiners hammer, Warrington type |
 |
H South Wheelwrights |
| B107 |
CARPENTRY |
mallet |
carpenters mallet |
 |
H North Cupboard Wheelwrights |
| B110 |
CARPENTRY |
calipers |
wheelwrights calipers |
 |
H South Wall Wheelwrights |
| B111 |
CARPENTRY |
pincers |
lasting pincers |
 |
H Wheelwrights |
| B112 |
CARPENTRY |
bit |
chopper. Usage unknown |
 |
H Drawer 4 Wheelwrights |
| B113 |
CARPENTRY |
gouge |
turning gouge |
 |
H Drawer 1 Wheelwrights |
| B114 |
CARPENTRY |
pliers |
pig ring pliers |
 |
H South Wall Wheelwrights |
| B115 |
CARPENTRY |
pincers |
three carpenters pincers, One present, two missing |
 |
H South Wall Wheelwrights |
| B116 |
CARPENTRY |
pliers |
pipe, or gas fitters, pliers |
 |
H South Wall Wheelwrights |
| B117 |
CARPENTRY |
tongs |
small tongs |
 |
H South Wall Wheelwrights |
| B118 |
CARPENTRY |
cutter |
wire cutter |
 |
H South Wall Wheelwrights |
| B119 |
CARPENTRY |
pliers |
four pair pliers. Thre pair present, one pair missing |
 |
H South Wall Wheelwrights |
| B120 |
CARPENTRY |
pincers |
large pincers |
 |
H South Wall Wheelwrights |
| B121 |
CARPENTRY |
hub |
cast iron hub for artillery type wheel |
 |
H East Wall Wheelwrights |
| B125 |
CARPENTRY |
saw |
frame saw |
 |
H North Wall Wheelwrights |
| B126 |
CARPENTRY |
saw |
woodcutters saw |
 |
H North Wall Wheelwrights |
| B129 |
CARPENTRY |
square |
steel square, marked in inches |
 |
H North Wall Wheelwrights |
| B130 |
CARPENTRY |
|
wheelwrights calipers |
 |
H Wheelwrights |
| B131 |
CARPENTRY |
axe |
Kent axe |
 |
H East Wall Wheelwrights |
| B132 |
CARPENTRY |
tyre |
length of unused tyre trap |
 |
H South Wall Wheelwrights |
| B133 |
CARPENTRY |
saw |
frame saw |
 |
H North Wall Wheelwrights |
| B134 |
CARPENTRY |
spanners |
a set of cart wheel spanners. Only two shown in thumbnail |
 |
H Drawer 2 Wheelwrights |
| B135 |
CARPENTRY |
spanner |
5 wheel nut spanners |
 |
H North Wall Wheelwrights |
| B136 |
CARPENTRY |
spanner |
drabble axle key, or wheel nut spanner |
 |
H East Wall Wheelwrights |
| B137 |
CARPENTRY |
spanner |
axle key |
 |
H Drawer 1 Wheelwrights |
| B138 |
CARPENTRY |
auger |
taper auger, reamer type |
 |
H North Wheelwrights |
| B139 |
CARPENTRY |
auger |
twist auger, extra long |
 |
H East Wall Wheelwrights |
| B140 |
CARPENTRY |
auger |
two twist augers, gouge pattern |
 |
H Wheelwrights |
| B141 |
CARPENTRY |
auger |
three twist augers, Scotch patern, wooden T handles, one auger missing |
 |
H East Wall Wheelwrights |
| B142 |
CARPENTRY |
auger |
three twist augers, solid nose pattern. 1.25, 1.25, and 1.5 inches |
 |
H East Wall Wheelwrights |
| B143 |
CARPENTRY |
auger |
four twist augers, Scotch patern. 2.5, 2.25 x 2 one not numbered, and 1.0 inches |
 |
H East Wall Wheelwrights |
| B144 |
CARPENTRY |
shooting block |
all metal mitre shooting block. Large, heavy, inscribed HUTCHENS PATENT |
 |
H Wheelwrights |
| B145 |
TRADE TOOLS |
jack |
old, mainly wood, cart jack, rack and pinion type, inscribed JI |
 |
H North Wall Wheelwrights |
| B146 |
TRADE TOOLS |
jack |
cart jack, lever, ratchet, and paul type |
 |
H North Wheelwrights |
| B148 |
TRADE TOOLS |
jack |
cart jack, screw type, cylindrical, mainly wood |
 |
H North Wheelwrights |
| B151 |
TRADE TOOLS |
scotch |
two scotches, or shoes, for braking a cart on a hill |
 |
H North Wheelwrights |
| B161 |
WHEELWRIGHTS |
bending rolls |
bending rolls for making cart whel rims out of plain iron strip |
 |
H Wheelwrights |
| B162 |
WHEELWRIGHTS |
muller and slab |
muller and slab, for grinding pigments for making paint. See aso B167 |
 |
H East Wheelwrights |
| B164 |
WHEELWRIGHTS |
chest of drawers |
a chest chest of drawers used for storing pigments for paint making. Four complete drawers and seven knobs missing. |
 |
H North Wheelwrights |
| B165 |
WHEELWRIGHTS |
axe |
coachmakers axe |
 |
H East Wall Wheelwrights |
| B167 |
WHEELWRIGHTS |
muller |
muller, for grinding pigments on a slab or otrher suitable surface. See also B162 |
|
H East Wheelwrights |
| B168 |
WHEELWRIGHTS |
wrench |
17 coachbuilders wrenches, assorted, some not numbered, five only shown in thumbnail |
 |
H East Wall Wheelwrights |
| B169 |
WHEELWRIGHTS |
vice |
leg vice |
 |
H South Wheelwrights |
| B171 |
WHEELWRIGHTS |
cramp |
joiners sash cramps, 1.25 metres maximum |
 |
H West Wall Wheelwrights |
| B172 |
WHEELWRIGHTS |
cramp |
joiners sash cramps, extendable in two pieces, 1.15 or 2.5 metres approx maxima |
 |
H West Wall Wheelwrights |
| C155 |
CARRIERS |
wheelbarrow |
restored wheelbarrow Wheelbarrow made in Berkhampstead and was in constant use in Pitstone Green Farm. |
 |
H Wheelwrights |
| C163 |
CARRIERS |
wheelbarrow |
wooden wheelbarrow wooden wheelbarrow with metal rim round wheel. |
 |
H Wheelwrights |
| C291 |
CARRIAGES CARTS AND WAGONS |
wheel |
wooden wheel Wooden wheel with steel rim. Blue with black rim and end of axle. Rim is fastened on with rivetts. |
 |
H Wheelwrights |
| C292 |
CARRIAGES CARTS AND WAGONS |
axle |
axle painted Axle painted blue. brass locating cap with "T. Cusworth, Builder,Munsbridge?" |
 |
H Wheelwrights |
| C317 |
LIGHTING |
lamp |
oil lamp Has circular container for oil into which wick holder is located. Silver reflector but lamp glass is missing. Black paint. |
 |
H Wheelwrights |
| C357 |
HORSES |
whipple trees |
whipple trees for horses Bar with swivel post in the centre attached to working implement and metal loops on the other side at either end to which horses' traces are fastened. |
 |
H East Wall wheelwright |
| C871 |
MILITARY |
Chain Saw |
Two handed flexilble chain saw in leather pouch |
 |
H South Wall Wheelwrights |
| C995 |
TOOLS |
chain saw |
Hand operated pull-pull chain saw in leather pouch, used by the miltary, restored. |
 |
H Wheelwrights |
| D158 |
CARPENTRY |
hand morticer |
Hand Morticer (Grey) |
 |
H Wheelwrights |
| D734 |
CARPENTRY |
spokeshave |
spokeshave |
 |
H South Wall Wheelwrights |
| D735 |
CARPENTRY |
spokeshave |
moulding shave |
 |
H South Wall Wheelwrights |
| D736 |
CARPENTRY |
hammer |
hammer, has socket one side of head for fitting alternative shape or material part |
 |
H South Wall Wheelwrights |
| D737 |
CARPENTRY |
glue pot |
glue pot |
 |
H East Wall Wheelwrights |
| D738 |
CARPENTRY |
lathe |
woodworkers treadle operated lathe on cast iron stand with wood tool tray to rear, 3 speeds, 20 inch centres x 4.5 inches centre height. No accssories |
 |
H Wheelwrights |
| D739 |
CARPENTRY |
saw |
frame saw, well made with turned frame members, narrow blade |
 |
H North Wall Wheelwrights |
| D740 |
CARPENTRY |
saw |
frame saw, narrow blade |
 |
H North Wall Wheelwrights |
| D741 |
CARPENTRY |
calipers |
large external calipers |
 |
H North Wall Wheelwrights |
| D742 |
DOMESTIC |
boot jack |
simple u shaped boot jack |
 |
H North Wall Wheelwrights |
| D743 |
TOOLS |
saw |
pit saw |
 |
H South Wall Wheelwrights |
| D744 |
CARRIAGES CARTS AND WAGONS |
axle stand |
a pair of simple metal axle stands, nonadjustable, 380 height. Only one shown in thumbnail |
 |
H North Wheelwrights |
| D745 |
CARRIAGES CARTS AND WAGONS |
axle stand |
simple metal axle stand, adjustable height |
 |
H North Wheelwrights |
| D746 |
TOOLS |
hacksaw |
large old hacksaw, two handed, blade missing |
 |
H North Wall Wheelwrights |
| D747 |
CARPENTRY |
saw |
frame saw, two man both two handed |
 |
H Wheelwrights |
| D748 |
CARPENTRY |
knife |
knife |
 |
H North Cupboard Wheelwrights |
| D749 |
FURNITURE |
cabinet |
first aid cabinet, home made |
 |
H North Wheelwrights |
| D750 |
TOOLS |
tongs |
tyre tongs |
 |
H North Wheelwrights |
| D751 |
TOOLS |
lever |
jacking lever to raise cart so that an axle stand or other support may be placed under the axle etc. |
 |
H Wheelwrights |
| D752 |
CARPENTRY |
saw |
frame saw, one man two handed |
 |
H South Wall Wheelwrights |
| D753 |
CARRIAGES CARTS AND WAGONS |
hub |
a hub from an old, large cart or wagon wheel to show how it was worked from a solid piece of timber, probably elm |
 |
H Wheelwrights |
| D754 |
TOOLS |
samson |
samson |
 |
H South Wall Wheelwrights |
| D755 |
TOOLS |
clamp |
clamp |
 |
H South Wall Wheelwrights |
| D756 |
TOOLS |
extractor |
tapered extractor key |
 |
H South Wall Wheelwrights |
| D757 |
MODELS |
model wheel |
model of a cart wheel to show how it is constructed |
 |
H East Wall Wheelwrights |
| D758 |
MODELS |
model cart |
model of a typical farm cart |
 |
H East Wheelwrights |
| D759 |
TOOLS |
tyre dog |
tyre dog |
 |
H Wheelwrights |
| D760 |
TOOLS |
tyring table |
tyring table for fitting tyres on to smaller wheels |
 |
H Wheelwrights |
| D761 |
CARRIAGES CARTS AND WAGONS |
templates |
collection of wooden templates for making,parts of carts, wagons, hames, wheelbarrows, etc, etc.Was B152, B153, B154, etc, etc, |
 |
H Wheelwrights |
| D762 |
TOOLS |
wedges |
set of five timber splitting wedges |
 |
H South Wheelwrights |
| D763 |
DOMESTIC |
candle holder |
a wall mounted candle holder, brass. |
 |
H South Wall Wheelwrights |
| D764 |
FARMING |
scotch |
two scotches, or shoes, for braking a cart on a hill |
 |
H East Wall Wheelwrights |
| D765 |
TOOLS |
level |
rectangular spirit level |
 |
H South Wheelwrights |
| D766 |
TOOLS |
jack |
Portway's Patent "Little Jack No 3" |
 |
H Wheelwrights |
| D768 |
TOOLS |
G cramps |
three G cramps differing widely in size |
 |
H South Wheelwrights |
| D769 |
CARPENTRY |
saw set |
four saw sets, gate type, differing widely in size |
 |
H South Wheelwrights |
| D770 |
CARPENTRY |
augers |
three assorted T handle augers |
 |
H South Wheelwrights |
| D771 |
TOOLS |
block |
two sheave wooden pulley block |
 |
H Wheelwrights |
| D772 |
CARPENTRY |
planes |
two moulding planes, inscribed W. SMITH |
 |
H South Wheelwrights |
| D773 |
WHEELWRIGHTS |
wheels |
six similar wheels as would have been used on wheelbarrows during 19th and early 20th century |
 |
H South Wheelwrights |
| D774 |
CARPENTRY |
saw |
profile cutting pit saw, ver narrow flexible blade, wood handle missing |
 |
H North Wall Wheelwrights |
| D776 |
CARPENTRY |
drill |
two hand operated drill, fitted with auger. drill would usually be clamped to workpiece or workbench/ |
 |
H East Wheelwrights |
